DNA, Madvapes

Madvapes Blacksmith Mod Review

The Madvapes Authentics line has brought you the Deviate alien-style mod, a Carbon 40 DNA40 device, the Bellow, and the Plume. Madvapes has now added a new vaporizer to their collection; another box called the Blacksmith. Buy it today for $199.99.

Why So Expensive?

Madvapes Authentics are made in the United States. They are designed and manufactured here where materials and labor cost more than in China. You are supporting the American economy and providing work for Americans by ordering one of these mods. Besides, they are not your usual vaporizers. Take a closer look.

Unique Patterns

Textures, colors, and patterns on the Madvapes Blacksmith Mod are all original and either exotic or industrial. There is the Templar with its medieval qualities and a rich shade of date brown that puts one in mind of a middle-eastern desert.

The Black Widow features only the Madvapes smoke plume against black while the Contour is black with a textured finish. Finally, a Diamond Plat is reminiscent of tire treads but in silver, not black, and certainly not rubber. Each one is collectible.

Unusual patterning extends to the arrangement and shapes of switches. The top button is a diamond, not a square. I thought at first it was simply a square tilted onto a point but it is truly a diamond set above the small screen. Below a display two small oval buttons are set at an angle like angry eyes over a mouth (USB port) to suggest aggression. Together these elements put the “mad” in “Madvapes.”

Technically Speaking

Madvapes utilizes an Evolv DNA 200W control panel, another reason for the high price. This is the finest box mod computer chip available. Not only is it Evolv’s latest creation but the system can be upgraded later using the built-in USB port and a computer.

A 200W board from Evolv supplies temperature control, not just overheating protection. Select your preferred vaping temperature to create relatively cool or quite hot e juice vapor. The addition of a tank with airflow control built into both caps allows you to further modulate temperature.

Coil Selection

You can still run a Blacksmith mod in VW mode using a coil made from Kanthal, but if you are going to use temperature control (TC) you had best be investing in Titanium or Nickel coils. I don’t mean the cheap Nichrome coils either: Ni200. This is a purer alloy.

The Blacksmith’s DNA 200W chip recognizes which type of coil has been installed into your atomizer as well as its resistance. If the coil is Ni200 or Titanium, it will allow you to select TC setting and a super-low resistance level. If you are still using Kanthal, the box will only permit you to work in VW mode.

Powerful Screen

With a DNA200 onboard, you know the screen is going to be beautiful. This one displays ohms, temperature, watts, and volts seamlessly. Recharge the machine from the port at a laptop or other USB source and watch the battery icon fill up over a couple of hours. Don’t literally sit and watch: you can keep vaping too.

Brainy Battery

There are three cells built into one with the Madvapes Blacksmith. The system charges all three at the same time but ensures a balanced charge, even if one cell has power remaining. The total battery power available is just 900 mAh. That’s all you need, which seems remarkable given the options on this vaporizer.

Threading

Use any 510-threaded atomizer tank and it will fit naturally onto the threading well. The collar appears wide, as though Madvapes gave this part of the mod aesthetic consideration like the rest of their box mod. Purchase your favorite version of the Blacksmith while supplies last.

 

Leave a Reply

Your email address will not be published. Required fields are marked *